In the field of industrial vision inspection, conventional FA lenses are often difficult to meet the detection needs of some special scenes, and then the 360° inspection lens becomes the ideal choice. It can easily cope with the cylindrical outer surface, the inner hole surface and the cube multiple surface inspection tasks, for industrial inspection to bring great convenience.

360° inspection lenses are mainly divided into 360° inner wall inspection lenses and 360° outer wall inspection lenses, for different inspection needs, you need to choose the right type.

The 360° internal inspection lens is powerful in that it can photograph both the surface and the bottom of the bore simultaneously, without the need to place the lens inside the product, but simply observe it from above the product. This feature gives it a significant advantage when detecting defects on the inside of products such as nuts, bottle caps and mechanical parts with holes. It not only improves inspection efficiency, but also avoids possible damage caused by the lens going deeper into the product.

The 360° exterior imaging lens simplifies the machine vision system and reduces costs. When inspecting the outer surface of a cylindrical product, only one camera with this lens is needed to present all images of the product's outer surface. This greatly reduces the complexity and cost investment of the equipment, while ensuring comprehensive and accurate inspection.

In the choice of 360 ° inspection lens, according to the specific detection object and needs to decide. If you need to detect the inner wall of the product, 360 ° inner wall inspection lens is the right choice; if the cylindrical product outer surface detection, 360 ° outer wall imaging lens is more appropriate. Reasonable choice of lens, in order to make industrial vision inspection work more efficient and accurate.